1 Environment setup 2 PC setup 2.1 IP setting 2.2 Speed and duplex settings 2.3 Network properties settings 3 aioquic server 3.1 Run aioquic 3.2 Run Chrome web browser 3.3 Download with method get 3.4 Upload with method POST 4 MsQuic server 5 QUIC10GCUC demo setup 6 Nios command shell 7 Command detail 7.1 Set Gateway IP address 7.2 Set FPGA IP address 7.3 Set FPGA MAC address 7.4 Load FPGA network parameters 7.5 Set FPGA port number 7.6 Enable showkey mode 7.7 Enable showcert mode 7.8 Enable showsessionparams mode 7.9 GET method 7.10 POST method. 24 POST method 7.11 PERF method. 25 PERF method 8 Graphic user interface 8.1 Connect with FPGA device 8.2 Set demo parameters 8.3 Test with myget command 8.4 Test with myperf command 9 Revision history Return to Top