1 Environment Setup 2 PC Setup 2.1 IP setting 2.2 Speed and duplex settings 2.3 Network properties settings 3 MsQuic server 4 FPGA development board setup 5 Serial Console 6 Command detail 6.1 Set FPGA’s IP Address 6.2 Set FPGA’s Port Number 6.3 Set FPGA’s MAC address 6.4 Enable showkey mode 6.5 Set certificate 6.6 Set RSA key information 6.7 Print certificate 6.8 Print RSA key information 6.9 Start a server 7 Test setup when using 2 FPGA boards 7.1 Environment setup when using 2 FPGA boards 7.2 Test sequence 7.2.1 Set parameters and start a server 7.2.2 Client download data test 7.2.3 Client upload data test 7.2.4 Client download/upload data test (Full duplex) 8 Test Result 9 Revision History Return to Top