1 Environment Setup 2 PC Setup 2.1 Speed and Duplex Setting 2.2 Network Properties Setting 3 WireGuard Software Setup 3.1 Install WireGuard 3.2 Set up WireGuard 4 FPGA Development Board Setup 4.1 ZCU106 Board Setup 4.2 KCU116 Board Setup 5 Command details 5.1 Set FPGA IP Address 5.2 Set FPGA Port Number 5.3 Set FPGA MAC Address 5.4 Set Gateway IP Address 5.5 Initialize TAI64 Timestamp 5.6 Set FPGA Private Key 5.7 Set WireGuard Interface Address IP 5.8 Set Peer Public Key 5.9 Set Allowed IPs 5.10 Set Endpoint IP Address 5.11 Set Preshared Key 5.12 Set Persistent Keepalive 5.13 Show Ephemeral Private Key 5.14 Activate WireGuard 6 Demo environment 6.1 Point-to-Point Encapsulator using Serial Console 6.1.1 User PC Setup 6.1.2 WireGuard Peer Configuration 6.1.3 WireGuard10G-IP Setup 6.1.4 Verify Connection 6.2 Selective Encapsulation using GUI 6.2.1 Graphical User Interface (GUI) 6.2.2 Connect with FPGA device 6.2.3 User PC Setup 6.2.4 WireGuard Peer Configuration 6.2.5 Edit Tunnel Configuration 6.2.6 Activate Tunnel 6.2.7 Deactivate Tunnel 7 Performance Test 7.1 PC to PC (WireGuard Software) 7.2 PC to PC via WireGuard10G-IP 7.3 Result Summary 8 Revision History Return to Top