Category: Storage

muNVMe-IP (Multi User NVMe IP) is designed and optimized for multiple data stream access to single NVMe SSD by multiple users simultaneously. RAID0x2 by muNVMe-IP module in this reference design are designed to split one user command to two muNVMe-IPs. The RAID0x2 module is implemented to increase the sequential write/read performance to 2 times(2X), comparing to the muNVMe-IP reference design....

NVMe PCIe Gen4 SSD offer very high performance and low latency on single SSD device. Making it possible to share the single SSD with multiple users at the same time. We would like to introduce the new data storage IP core which can allow multiple data stream access simultaneously to NVMe PCIe Gen4 SSD. Utilizing the latest NVMe SSD more...

SSD performance claim is mostly under best condition such as SSD Cache is activated. There is no warranty that SSD can support consistent speed for entire write/read operation. To achieve high speed sustained data rate recording or reading with NVMe SSD, an amount of Data buffer is required to absorb SSD’s non-consistent characteristic. Our NVMe IP core DDR reference design...

Most of you may wondering what’s the different between NVMe over TCP and NVMe over RDMA. Both are the same NVMe over Fabrics protocol but the key different is NVMe over RDMA is designed for data transfer between Host Main Memory and Storage. So you need to have a complete Host systems with CPU, OS, Device and specific hardware that...

Introduction of storage In the past few decades, storing data on the computer was terrible and took ages to complete it. Therefore, we were storing only significant data such as the program or result of executing the program. Because, the capacity of storage at that time was very tiny. And, we mainly used computers for scientific purposes, not for entertainment...